NFPA 101×Plumbing

NFPA 101 Plumbing Compliance Check

AI-powered NFPA 101 — Life Safety Code compliance checking for plumbing construction drawings. Detect violations, missing requirements, and code compliance issues before they delay your permit or hit the field.

About NFPA 101 — Life Safety Code

The comprehensive life safety code addressing construction, protection, and occupancy features necessary to minimize danger to life from fire, smoke, fumes, and panic. Widely adopted for existing buildings and healthcare facilities.

Scope

Life safety from fire in all building types; primary code for healthcare facilities

Editions

NFPA 101 (2021), 2018, 2015

Applicability

Required by CMS for healthcare facilities (hospitals, nursing homes). Also adopted by many states and the VA for all occupancy types.

What We Check For

NFPA 101 compliance checking for plumbing drawings
Cross-reference plumbing details against NFPA 101 — Life Safety Code requirements
Verify plumbing specifications meet NFPA 101 minimum standards
Check plumbing coordination against NFPA 101 referenced standards
Identify plumbing issues that could cause NFPA 101 compliance failures
Review plumbing drawings for common NFPA 101 violations

Common Plumbing Issues We Catch

Plumbing supply, drainage, venting, medical gas, and fire suppression water supply drawings.

!
Drainage slope and sizing errors
!
Vent system termination and sizing issues
!
Fixture count vs occupancy mismatch
!
Backflow prevention device omissions
!
Water heater clearance and venting errors
!
Grease interceptor sizing deficiencies
!
Cross-connection control violations

Why NFPA 101 Plumbing Compliance Matters

NFPA 101 — Life Safety Code compliance for plumbing drawings is critical because violations discovered during plan review delay permits, and issues found during construction result in costly rework, change orders, and schedule delays. Catching NFPA 101 plumbing issues during preconstruction costs 10x less than fixing them in the field (CII, 1-10-100 Rule).

How Articulate Checks NFPA 101 Compliance

1

Upload Your PDF Drawings

Upload your plumbing PDF drawings. No BIM models or 3D software required — Articulate works with the 2D PDFs your team already uses.

2

Purpose-Built Construction AI

Articulate's AI is trained specifically to review construction drawings against NFPA 101 requirements. Domain-specific training catches issues that generic AI tools miss.

3

Exact Issue Locations

Every NFPA 101 compliance issue is tagged with the exact page and coordinates on your drawings, plus severity ratings (high, medium, low) so you can prioritize.

4

One-Click RFI Generation

Turn detected NFPA 101 issues into formatted RFIs with a single click. Push directly to Procore with issue details, code references, and page locations.

Related Resources

NFPA 101 Checks for Other Disciplines

Plumbing Checks Against Other Codes

Check Your Plumbing Drawings Against NFPA 101

Upload your PDF drawings and our AI will check them for NFPA 101 — Life Safety Code compliance — automatically.