ADA Accessibility Quick-Reference
A visual guide to ADA accessibility requirements including ramp slopes, door clearances, turning radii, and restroom dimensions. Essential reference for ensuring your designs meet architectural drawing accessibility standards.
According to the U.S. Access Board, 61 million Americans (26% of adults) have a disability, and accessibility violations remain the most common ADA lawsuit trigger. The National Council on Disability reports that ADA-related construction litigation costs average $75,000-$150,000 per case, not including remediation costs. The most common violations are improper ramp slopes, insufficient door maneuvering clearances, and non-compliant restrooms.
Quick Jump
The Numbers You Need to Know
Ramp Requirements
Door Clearances
Turning & Maneuvering Space
Accessible Routes
Restroom Clearances
Frequently Asked Questions
The maximum ramp slope is 1:12 (8.33% or 4.8°), meaning for every 1 inch of vertical rise, you need at least 12 inches of horizontal run. For example, a 30-inch rise requires a minimum 30-foot ramp length. Ramps with slopes steeper than 1:20 but no steeper than 1:12 require handrails on both sides. Always verify these dimensions on your construction drawings.
The minimum clear opening width is 32 inches, measured between the face of the door and the stop when the door is open 90 degrees. A standard 36-inch door typically provides 34-35 inches of clear width when accounting for hardware. For easier wheelchair passage, 36 inches clear is recommended.
ADA requires a 60-inch diameter circular space or a 60-inch x 60-inch T-shaped space for wheelchair turning. The T-shape must have arms at least 36 inches wide. This space must be provided at key locations including within accessible restroom stalls, at the end of dead-end corridors, and at building entrances. Turning spaces are closely tied to egress design and occupant load calculations.
Related Resources
Automate Your ADA Compliance Checks
Tired of manually checking door clearances, ramp slopes, and turning radii on every drawing? Articulate's AI can scan your PDFs and flag potential ADA violations with exact locations in seconds.
Catch accessibility issues before they become expensive field corrections.
Try Automated ADA Review FreeSources & References
- • 2010 ADA Standards for Accessible Design, U.S. Department of Justice
- • ICC/ANSI A117.1-2017: Accessible and Usable Buildings and Facilities
- • U.S. Access Board: ADA Accessibility Guidelines (ADAAG)
- • Fair Housing Act Design Manual, U.S. Department of Housing and Urban Development
- • CDC Disability and Health Data System (2023): Disability Prevalence Statistics
- • National Council on Disability: ADA Compliance Cost Analysis (2022)
Requirements based on ADA Standards for Accessible Design. For official guidelines, visit the U.S. Access Board. Always verify requirements with your local Authority Having Jurisdiction (AHJ).