How to Read a Site Plan
Understanding property boundaries, grading, utilities, and site features on civil drawings
What is a Site Plan?
A site plan (also called a plot plan) is a bird's-eye view drawing showing the arrangement of improvements on a property. It shows the relationship between buildings, driveways, utilities, landscaping, and property boundaries. Familiarity with site and civil symbols is essential for interpreting these drawings accurately.
Key Elements of a Site Plan
- • Property boundaries and dimensions
- • Setback lines (front, side, rear)
- • Easements (utility, drainage, access)
- • Rights-of-way
- • Adjacent property info
- • Building footprint and location
- • Finish floor elevation (FFE)
- • Building entrances
- • Distances to property lines
- • Gross building area
- • Parking areas and counts
- • Driveways and access points
- • Sidewalks and paths
- • Retaining walls
- • Fences and gates
- • Water lines and meters
- • Sewer lines and cleanouts
- • Storm drainage
- • Electrical/gas service
- • Fire hydrant locations
Understanding Contour Lines
Contour lines show elevation changes across the site. For more detail on interpreting slopes and earthwork, see how to read a grading plan. Key principles:
The vertical distance between contour lines. Common intervals: 1', 2', or 5'. Smaller intervals show more detail.
Lines close together = steep slope. Lines spread apart = gentle slope or flat area.
Dashed lines = existing contours. Solid lines = proposed (new) contours after grading.
Water flows perpendicular to contour lines. "V" shapes pointing uphill indicate valleys/swales.
Spot Elevations and Benchmarks
Specific elevation points are called out on site plans:
| Abbreviation | Meaning | Usage |
|---|---|---|
| FFE | Finish Floor Elevation | Building entry levels |
| TW | Top of Wall | Retaining walls |
| BW | Bottom of Wall | Retaining walls |
| TC | Top of Curb | Curb and gutter |
| FL | Flow Line | Drainage channels |
| INV | Invert | Pipe bottom elevation |
| BM | Benchmark | Survey reference point |
Common Site Plan Symbols
Symbols vary between firms and municipalities. Always reference the legend on Sheet C-001 or the symbol key.
Setbacks and Zoning
Setback lines show minimum distances from property lines where building is not permitted. Understanding civil abbreviations will help you decode setback and zoning annotations:
- Front setback — Distance from street/right-of-way
- Side setback — Distance from side property lines
- Rear setback — Distance from rear property line
- Corner lot — May have two front setbacks
Setbacks are determined by local zoning ordinances and vary by zoning district. Building footprint must stay within the "buildable area" defined by setback lines.
Related Resources
Utilities, drainage, and grading symbols
Understanding engineering scales
Common abbreviations on site plans
Complete guide to building drawings
Drainage design, BMPs, and erosion control
AI-powered site and civil drawing review
Catch Site Coordination Issues Early
Site plans often conflict with architectural and MEP drawings. Articulate's AI can cross-check site utility locations against building plans to catch coordination issues.
Try Automated Coordination