AI Pre-Permit Review for MEP Engineers
Review construction drawings for code compliance and coordination issues before submitting for permit, reducing plan check comments and approval time. Designed for the way mep engineers work.
Schedule a DemoThe Challenges MEP Engineers Face
Ductwork and piping routing conflicts with structural beams
Insufficient ceiling plenum space for all disciplines
Equipment access and maintenance clearance violations
Electrical panel working clearance per NEC 110.26
Fire damper locations at rated wall and floor assemblies
How Articulate Helps
Faster Pre-Permit Review for MEP Engineers
AI reviews your entire drawing set in hours instead of days. MEP Engineers get comprehensive pre-permit drawing review results without pulling senior staff off other projects.
Purpose-Built Construction AI
Articulate's AI is trained specifically for construction drawing analysis — not a generic AI tool repurposed for construction. This domain expertise gives mep engineers higher confidence in every detected issue.
Exact Issue Locations
Every detected issue includes the exact page and coordinates on your PDF drawings, plus severity ratings (high, medium, low) so mep engineers can prioritize their review time.
Actionable Results
Turn detected issues into formatted RFIs with one click. Push directly to Procore with issue details, code references, and page locations — no manual re-entry.
Example Issues Articulate Catches
Real-world issues detected by AI analysis, relevant to mep engineers doing pre-permit drawing review:
Ceiling space conflict: 24" supply duct, 8" sprinkler main, and 4" conduit all routed at same elevation — only 18" of plenum available
Equipment clearance: electrical panel in room 112 has only 24" clearance (36" required per NEC 110.26)
Fire damper missing: ductwork penetrates 2-hour rated shaft at level 2 — no fire damper shown
Plumbing conflict: 4" waste line routes through structural beam flange — no sleeve or core drill noted
Controls gap: VAV boxes shown on mechanical but no control wiring route shown on electrical drawings
Key Features
Purpose-built construction AI tailored for mep engineer pre-permit drawing review workflows
2D PDF analysis — no BIM models or 3D software required
10 issue categories covering coordination, code compliance, missing info, and more
Exact page locations and severity ratings (high/medium/low) for every issue
One-click RFI generation with Procore integration
Building code compliance checking (IBC, IRC, ADA, NEC, NFPA, and local codes)
Cross-discipline coordination between architectural, structural, MEP, civil, and fire protection
Drawing revision comparison to catch unclouded changes
When to Use Pre-Permit Review
Before submitting drawings to the building department for permit. Typically at the 90-100% CD phase.
Other Use Cases for MEP Engineers
Pre-Permit Review for Other Roles
Ready to Try AI Pre-Permit Review?
See how Articulate catches the issues that matter most to mep engineers. Upload your drawings for a free analysis.